Jameco-electronics Rabbit 3000 Manuel d'utilisateur télécharger pdf (Page 320)

100

101

User’s Manual 311

B.1.13 Pulse Width Modulator Improvements

Several new features have been added to the pulse width modulator. First, a new PWM

interrupt can be set up to be requested on every PWM cycle, every other cycle, every

fourth cycle, or every eighth cycle. The setup for this interrupt is done in the PWL0R and

PWL1R registers, listed in Table B-25 and Table B-26.

Options are available to suppress the PWM output for seven-of-eight, three-of-four and

one-of-two iterations of the PWM counter The one-of-eight option works nicely with R/C

servos, which require a 1 ms to 2 ms pulse width and a 20 ms period. This option gives the

full resolution for the pulse width while still meeting the period requirements. The one-of-

four and one-of-two options can be used to create more virtual PWM channels using soft-

ware to multiplex the PWM outputs. There is a separate option to only generate an inter-

rupt during the active iteration of the PWM count. The timing is shown below.

Figure B-21. PWM Interrupt and Output Timing

iteration

1/4 output

1/8 output

1/2 output

1/8 interrupt

1/4 interrupt

1/2 interrupt

0 1 2 3 4 5 6 7

1 2 ... 315 316 317 318 319 320 321 322 323 324 325 ... 348 349

Commentaires sur ces manuels

Pas de commentaire

Jameco-electronics Rabbit 3000 Manuel d'utilisateur Page 320

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Jameco-electronics Rabbit 3000